Woltman Turbine Meter
Being the leading names in
the industry, our company is regarded as one of the well established
manufacturers and exporters of Woltman
Turbine Meter. These turbine meters are manufactured under the strict guidance of our professional using tested quality components and
innovative technologies. These
turbine meters are automatic in nature in
compliance with set quality guidelines. Available in different capacity, these
turbine meters are used to measure the flow rate of water passing through
pipelines. Our Woltman Turbine Meter is
easy to use and are highly sensitive.
Technical Parameters
| Nominal Diameter (DN) | Unit | Single-jet | Multi-jet | ||||||
| mm | 15 | 20 | 15 | 20 | 25 | 40 | 50 | ||
| Inches | 1/2 | 3/4 | 1/4 | 3/4 | 1 | 1 1/2 | 2 | ||
| Starting Flow Rate | I/h | 14 | 18 | 14 | 18 | 25 | 70 | 80 | |
| Maximum Admissible Temp. | C | 45 C (Optional 90C) | |||||||
| Maximum Admissible Working Pressure | bar (kg/cm3) | 10 | |||||||
| Test Pressure - P | bar (kg/cm2) | 16 | |||||||
| Qmax | Max. Peak flow +- 2% Accuracy | m3/hr | 3.0 | 5.0 | 3.0 | 5.0 | 7.0 | 20.0 | 30.0 |
| Qn | Nominal flow +- 2% Accuracy | m3/hr | 1.5 | 2.5 | 1.5 | 2.5 | 3.5 | 10.0 | 15.0 |
| Qt. | Transitional flow +-2% Accuracy | I /h | 120 | 200 | 120 | 200 | 280 | 800 | 1200 |
| Qmin | Minimum flow +- 5% Accuracy | I / h | 30 | 50 | 30 | 50 | 70 | 200 | 300 |
| Head Loss at | Qmax | m | 7.0 | 7.0 | 6.5 | 7.5 | 9.0 | 5.0 | 4.8 |
| Qn | m | 1.7 | 1.8 | 1.7 | 1.9 | 2.3 | 1.3 | 1.2 | |
| Dimension | |||||||||
| Length (without Tail Pipes) | mm | 165 | 190 | 260 | 300 | 330 | |||
| Length (with Tail Pipes) | mm | 250 | 290 | 250 | 290 | 380 | 430 | 470 | |
50mm Woltman Dial Picture
Salient Features
- Velocity type meter
- Direct magnetic transmission
- Class B ISO 4064
- Superior accuracy and long-term reliability
- Highly sensitive to low flow rate and very accurate over its entire flow range.
- Low head loss.
- Vacuum sealed. leak proof and dry Totaliser.
- Maintenance-free long working life.